BYSYC - BONDMASTER, 40-1002
- MSDS: BYSYC
- Manufacturer: NATIONAL STARCH AND CHEMICAL CO
- Product Name: BONDMASTER, 40-1002
- National Stock Number: 8040-00N062942
Product Identification
Product ID:BONDMASTER, 40-1002
MSDS Date:12/29/1989
FSC:8040
NIIN:00N062942
MSDS Number: BYSYC
Responsible Party
BRIDGEWATER, NJ 08807
US
Emergency Phone: 908-685-5385
Info Phone: 908-685-5000
Preparer: BETTY L. SULLIVAN
Cage: 85091
Contractor
Telephone: 908685-5306
Cage: 85091
Ingredients
NON-HAZARDOUS INGREDIENTS
OSHA PEL N/K
ACGIH TLV: N/K
<0.02 LB/GAL
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY BE MILDLY IRRITATING TO EYES AS
WITH ANY FOREIGN MATERIAL IN THE EYE. THIS PRODUCT SHOULD BE
CONSIDERED NON-HAZARDOUS AND HAS NO KNOWN CHRONIC EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . SKIN:
FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD . EYES: FLUSH EYES WITH
LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES OR UNTIL IRRITATION
SUBSIDES. IF IRRITATION PERSISTS, GET MEDICAL ATTENTION.
Fire Fighting
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT APPLICABLE.
Accidental Release
Spill Release Procedures:SPILLS SHOULD BE TAKEN UP WITH SUITABLE
ABSORBENT AND PLACED IN CONTAINERS. SPILL AREA CAN BE WASHED WITH
WATER; COLLECT WASH WATER FOR APPROVED DISPOSAL. DO NOT FLUSH TO
STORM SEWER OR WATERWAY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE BETWEEN 40-100F. PROTECT FROM
FREEZING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NONE REQUIRED UNDER NORMAL HANDLING CONDITIONS.
USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN .
Ventilation:GENERAL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING IS NORMALLY NOT
NECESSARY FOR FORSEEABLE CONDITIONS OF USE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:>212F,>100C
Melt/Freeze Pt:M.P/F.P Text:<40F,<4C
Vapor Pres:17.5 @ 20C
Vapor Density:0.62
Spec Gravity:1.188 (H*2O=1)
pH:7.0
Evaporation Rate & Reference:1 (WATER)
Solubility in Water:MISCIBLE
Appearance and Odor:WHITE LIQUID; TYPICAL SLIGHT SWEET ODOR.
Percent Volatiles by Volume:43.5WT
Stability
Stability Indicator/Materials to Avoid:YES
MATERIALS THAT REACT WITH WATER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.
Disposal
Waste Disposal Methods:WASTE DISPOSAL SHOULD BE IN ACCORDANCE WITH
EXISTING FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.